• 2026考研英語全程班 6班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 武漢理工大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

一、姓名：羅國強

二、基本情況：

1、出生年月：1980-10

2、學位：博士

3、職稱：副研究員

4、工作院系：材料復合新技術國家重點實驗室

三、教育經歷(從大學開始)：

1997年9月-2001年7月，武漢理工大學(原武漢工業大學)，材料科學與工程專業，本科/大學

2001年9月-2004年7月，武漢理工大學，材料學，研究生/碩士

2004年9月-2007年6月武漢理工大學，材料加工工程，研究生/博士

四、工作經歷：

2007年9月-2010年3月中國工程物理研究院流體物理研究所，沖擊波物理與爆轟物理國防科技重點實驗室，凝聚態物理博士后

2010年9月至今，武漢理工大學，材料復合新技術國家重點實驗室，講師、副研究員。

五、研究領域(不多于3個)：

先進復合材料以及功能梯度復合材料的設計、制備技術、結構控制、性能及應用研究

六、科研項目(不多于5項)：

l 國家自然科學基金(項目編號：11072228 )密度梯度飛片復雜加載理論與實驗研究，2011.01-2013.12, 項目負責人

l 國家自然科學基金(項目編號：51202175 )：用于復雜加載技術的功能梯度飛片材料的設計、薄帶鑄造法制備及其性能，2013.01-2015.12, 項目負責人

l 武漢理工大學自主創新基金：先進熱管理復合材料的微結構設計、調控與性能增強，(項目批準號:2013-II-024)”，2013.06-2015.05, 項目負責人

七、代表性論文及著作(不多于10項)：

[1]S.L.Liu, K.Yu, Q.Shen, M.J.Li, W.S.Chen, G.Q.Luo, L.M.Zhang: Fabrication of W@Cu composite powders by direct electroless plating using a dripping method. Journal of Wuhan University of Technology-Materials Science Edition, 2013, 28(4): 829-833

[2]P.A.Chen, G.Q.Luo*, Q.Shen, M.J.Li, L.M.Zhang: Thermal and electrical properties of W-Cu composite produced by activated sintering. Materials & Design, 2013, 46: 101-105(Corresponding author)

[3]G.Q.Luo, X.J.Jiang, M.J.Li, Q.Shen, L.M.Zhang, H.G.Yu: Facile Fabrication and Enhanced Photocatalytic Performance of Ag/AgCl/rGO Heterostructure Photocatalyst. Acs Applied Materials & Interfacse, 2013, 5(6): 2161-2168

[4]G.Q.Luo, J.Zhang, M.J.Li, Q.Q.Wei, Q.Shen, L.M.Zhang: Interfacial Microstructure and Mechanical Strength of 93W/Ta Diffusion-Bonded Joints with Ni Interlayer. Metallurgical and materials transactions A-Physical Metallurgy and Materials Science, 2013, 44A(2): 602-605

[5]Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 559: 868-874

[6]P.A.Chen, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: The mechanical properties of W-Cu composite by activated sintering. International Journal of Refractory Metals & Hard Materials, 2013, 36: 220-224

[7]Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg-Al joints. Journal of Alloys and Compounds, 2012,541: 458-461

[8]C.Chen, J.G.Li, G.Q.Luo*, Y.L.Xiong, Q.Shen, L.M.Zhang: Size-controlled in situ synthesis and photo-responsive properties of silver/poly(methyl methacrylate) nanocomposite films with high silver content. Applied Surface Science, 2012, 258(24): 10180-10184

[9]J.Zhang, G.Q.Luo, Y.Y.Wang, Q.Shen, L.M.Zhang: An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer. Materials Letters, 2012, 83: 189-191

[10]J.Zhang, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer. Materials & Design, 2012, 39: 81-86

八、聯系方式：

1、Tel：027-87217492

2、E-mail：luoguoqiang1980@sina.com

3、工作地址(實驗室)：武漢理工大學西院逸夫樓五樓,430070

1.Name:LUO Guoqiang

2.Brief introduction:

1)Date of birth:Oct.,1980

2)Degree:Doctor

3)Title:Associate Professor

4)Working department:State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology

3.Education experience(after entering university):

Sept. 2004 - June 2007 Ph.D. degree in Materials Processing Engineering

Wuhan University of Technology, Wuhan, P.R. China

Sept. 2001 - June 2004 M.S. degree in Materials Science

Wuhan University of Technology, Wuhan, P.R. China

Sept. 1997 - June 2001 B.S. degree in Materials Science and Engineering

Wuhan University of Technology, Wuhan, P.R. China

4.Working experience:

Oct. 2010 - present Associate Professor

Wuhan University of Technology, Wuhan, P.R. China

July 2007 - Sept. 2010 Postdoctor

Institute of fluid physics, China Academy of Engineering Physics, Sichuan, P.R. China

5.Research field(no more than 3):

l Novel composite materials including functionally graded materials(FGMs),Metal matrix composites(MMCs) and Ceramic reinforced composites(CRC)

l Advanced processing technologies for novel composite, such as diffusion bonding (DB), tape-casting, spark plasma sintering (SPS), plasma activated sintering (PAS) and MA-HP

6.Research project(no more than 5):

l The National Natural Science Foundation of China (NSFC): Theoretical and experimental research on complex-loading property of density gradient flyer-plate materials, No. 11072228, 2011.01-2013.12, Person in Charge

l The National Natural Science Foundation of China (NSFC): Research on design and preparation of functionally gradient flyer-plate materials using complex-loading technology, No. 51202175, 2013.01-2015.12, Person in Charge

l The Fundamental Research Funds for the Central Universities: Enhanced properties of advanced thermal management composites with designable and controllable microstructure, No. WUT: 2013-II-024, 2013.06-2015.05, Person in Charge

7.Representative papers and works(no more than 10):

[1]S.L.Liu, K.Yu, Q.Shen, M.J.Li, W.S.Chen, G.Q.Luo, L.M.Zhang: Fabrication of W@Cu composite powders by direct electroless plating using a dripping method. Journal of Wuhan University of Technology-Materials Science Edition, 2013, 28(4): 829-833

[2]P.A.Chen, G.Q.Luo*, Q.Shen, M.J.Li, L.M.Zhang: Thermal and electrical properties of W-Cu composite produced by activated sintering. Materials & Design, 2013, 46: 101-105(Corresponding author)

[3]G.Q.Luo, X.J.Jiang, M.J.Li, Q.Shen, L.M.Zhang, H.G.Yu: Facile Fabrication and Enhanced Photocatalytic Performance of Ag/AgCl/rGO Heterostructure Photocatalyst. Acs Applied Materials & Interfacse, 2013, 5(6): 2161-2168

[4]G.Q.Luo, J.Zhang, M.J.Li, Q.Q.Wei, Q.Shen, L.M.Zhang: Interfacial Microstructure and Mechanical Strength of 93W/Ta Diffusion-Bonded Joints with Ni Interlayer. Metallurgical and materials transactions A-Physical Metallurgy and Materials Science, 2013, 44A(2): 602-605

[5]Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 2013, 559: 868-874

[6]P.A.Chen, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: The mechanical properties of W-Cu composite by activated sintering. International Journal of Refractory Metals & Hard Materials, 2013, 36: 220-224

[7]Y.Y.Wang, G.Q.Luo*, J.Zhang, Q.Shen, L.M.Zhang: Effect of silver interlayer on microstructure and mechanical properties of diffusion-bonded Mg-Al joints. Journal of Alloys and Compounds, 2012,541: 458-461

[8]C.Chen, J.G.Li, G.Q.Luo*, Y.L.Xiong, Q.Shen, L.M.Zhang: Size-controlled in situ synthesis and photo-responsive properties of silver/poly(methyl methacrylate) nanocomposite films with high silver content. Applied Surface Science, 2012, 258(24): 10180-10184

[9]J.Zhang, G.Q.Luo, Y.Y.Wang, Q.Shen, L.M.Zhang: An investigation on diffusion bonding of aluminum and magnesium using a Ni interlayer. Materials Letters, 2012, 83: 189-191

[10]J.Zhang, Q.Shen, G.Q.Luo*, M.J.Li, L.M.Zhang: Microstructure and bonding strength of diffusion welding of Mo/Cu joints with Ni interlayer. Materials & Design, 2012, 39: 81-86

8.Contact information:

1) Tel:027-87217492

2) E-mail:luoguoqiang1980@sina.com

3) Location of lab:State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, P.R. China