• 2026考研英語全程班 6班
• 26考研全科上岸規劃營「擇校▪規劃▪備考」
• 武漢理工大學2026考研專業課復習資料「真題▪筆記▪講義▪題庫」

一、姓名：董淑娟

二、基本情況：

1、出生年月：1987.07

2、學位：博士

3、職稱：研究員

4、工作院系：硅酸鹽工程中心、硅酸鹽建筑材料國家重點實驗室

三、教育經歷(從大學開始)：

2010.09-2013.12 法國貝爾福蒙貝利亞技術大學(UTBM)工學博士

2007.09-2010.06 西安交通大學工學碩士

2004.09-2007.06 聊城大學 理學學士

四、工作經歷：

2014.10-至今 武漢理工大學研究員

2014.01-2014.10法國貝爾福蒙貝利亞技術大學(UTBM)ATER博士后

五、研究領域(不多于3個)：

1. 材料合成與表面涂層技術;

2. 表面預處理與高性能涂層制備;

3. 高溫熱防護涂層的設計制備與表征。

六、科研項目(不多于5項)：

1. 國家自然科學基金青年基金項目、項目負責人;

2. 武漢理工大學自主創新基金項目、項目負責人;

3. 材料成形與模具技術國家重點實驗室開放基金項目、項目負責人;

4. 硅酸鹽建筑材料國家重點實驗室自主創新基金項目、項目負責人

七、代表性論文及著作(不多于10項)：

1.S. Dong, et al. Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime. Surface and Coatings Technology. 2013, 236, 557-567.

2.S. Dong, et al. Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting. Surface and Coatings Technology. 2013, 225, 58-65.

3.S. Dong, et al. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrate in plasma spraying process: From single splat to coating. Surface and Coatings Technology. 2015, 268, 46-51.

4.S. Dong,et al. Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: microstructure and wear resistance. Surface and Coatings Technology.2015, 268, 24-29.

5.S. Dong, et al. Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics. Appl. Phys. A-Materials Science&Processing. 2015, 118, 283-290.

6.S. Dong, et al. Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting. Journal of Alloys and Compound.2014, 584, 254-260.

7.S. Dong, et al. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting. Materials Letters. 2012, 66(1), 289-291.

8.S. Dong,et al. Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats. Journal of Thermal Spray Technology. 2013, 22(1), 61-68.

9.S. Dong, et al. Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings. Journal of Thermal Spray Technology. 2013, 22(2-3), 213-220.

10.S. Dong, et al. Preparation of aluminum coatings by atmospheric plasma spraying and dry-ice blasting and their corrosion behavior. Journal of Thermal Spray Technology. 2013, 22(7), 1222-1229.

八、聯系方式：

1、Tel：027-87859057;

2、E-mail：dongsj@whut.edu.cn;dongsj1987@163.com

3、工作地址(實驗室)：硅酸鹽建筑材料國家重點實驗室301室

1. Name: Shujuan Dong

2. Brief introduction:

1) Date of birth: July 1987

2) Degree: Ph.D

3) Title: Research Professor

4) Working department: State Key Laboratory of Silicate Materials for Architectures

3. Education experience (after entering university):

2010.09-2014.12: University of Technology of Belfort-Montbeliard, Ph.D

2007.09-2010.06: Xi’an Jiaotong University, Master

2004.09-2007.06: Liaocheng University, Bachelor

4. Working experience:

2014.10-present: Wuhan University of Technology, Research Professor

2014.01-2014.10: University of Technology of Belfort-Montbeliard, ATER-Postdoc

5. Research field (no more than 3):

1) Materials synthesis and surface coating technology;

2) Surface treatment and preparation of high-performance coatings;

3) Design, preparation and characterization of thermal barrier coatings

6. Research project (no more than 5):

1) National Natural Science Foundation of China (Young Scholar Program);

2) Fundamental Research Funds for the Central Universities at Wuhan University of Technology;

3) Project of State Key Laboratory of Materials Processing and Die & Mould Technology;

4) Project of State Key Laboratory of Silicate Materials for Architectures

7. Representative papers and works (no more than 10):

1)S. Dong, et al. Multi-layered thermal barrier coatings fabricated by plasma-spraying and dry-ice blasting: Microstructure characterization and prolonged lifetime. Surface and Coatings Technology. 2013, 236, 557-567.

2)S. Dong, et al. Microstructure and properties of Cr2O3 coating deposited by plasma spraying and dry-ice blasting. Surface and Coatings Technology. 2013, 225, 58-65.

3)S. Dong, et al. Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrate in plasma spraying process: From single splat to coating. Surface and Coatings Technology. 2015, 268, 46-51.

4)S. Dong,et al. Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: microstructure and wear resistance. Surface and Coatings Technology. 2015, 268, 24-29.

5)S. Dong, et al. Dielectric properties of Al2O3 coatings deposited via atmospheric plasma spraying and dry-ice blasting correlated with microstructural characteristics. Appl. Phys. A-Materials Science&Processing. 2015, 118, 283-290.

6)S. Dong, et al. Fabrication of FeSiB magnetic coatings with improved saturation magnetization by plasma spray and dry-ice blasting. Journal of Alloys and Compound.2014, 584, 254-260.

7)S. Dong, et al. Improvement of adhesion of plasma-sprayed Al2O3 coatings by using dry-ice blasting. Materials Letters. 2012, 66(1), 289-291.

8)S. Dong, et al. Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats. Journal of Thermal Spray Technology. 2013, 22(1), 61-68.

9)S. Dong, et al. Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings. Journal of Thermal Spray Technology. 2013, 22(2-3), 213-220.

10)S. Dong, et al. Preparation of aluminum coatings by atmospheric plasma spraying and dry-ice blasting and their corrosion behavior. Journal of Thermal Spray Technology. 2013, 22(7), 1222-1229.

8. Contact information:

1) Tel: +86-027-87859057;

2) E-mail：dongsj@whut.edu.cn;dongsj1987@163.com

3) Addresses: Room 301, State Key Laboratory of Silicate Materials for Architectures